Driving Directions to Our Facility

Driving Directions to UniFund, Millyard Technology Park

Approaching Nashua from Massachusetts and other points South, Route 3 Everett Turnpike

• In Nashua, take Exit 5 and the Simon Street Exit (Just after MacSteel)
• Go through first stop sign and proceed for about a mile (be careful of the school zone). The canal waterway will be to your left. Take a left at the next stop sign, to head toward the Millyard area.
• Proceed straight ahead, and take aim at the tall smokestack with the word “Millyard” on it. You can’t miss it. When you are at the base of the stack, look up and straight ahead you will see the Millyard Technology Park building. See “Entrance to Building” below.

Approaching Nashua from Merrimack and Manchester, NH, Route 3 Everett Turnpike

• Using Exit 5, Nashua, reverse your direction as if you want to head back North on Everett Turnpike. Take Exit 5 East towards Nashua. Just as you cross the overpass, bear North towards Route 3 and Everett Turnpike. It is a very long entry ramp that merges with other traffic. On the ramp, look for the Simon Street exit, which is just past MacSteel.
• Go through first stop sign and proceed for about a mile (be careful of the school zone). The canal waterway will be to your left. Take a left at the next stop sign, to head toward the Millyard area.
• Proceed straight ahead, and take aim at the tall smokestack with the word “Millyard” on it. You can’t miss it. When you are at the base of the stack, look up and straight ahead you will see the Millyard Technology Park building. See “Entrance to Building” below.

NH Route 111

Approaching from East of Nashua: Cross Main Street and proceed West on Hollis Street / Rt. 111. At the second light, take a right on Pine Street. As you cross through the first stop sign, you will find yourself entering the old historic Nashua mill yard. Proceed straight ahead and take aim at the tall smokestack with the word “Millyard” on it. You can’t miss it. When you are at the base of the stack, look up and straight ahead you will see the Millyard Technology Park building. See “Entrance to Building” below.

Approaching from East of Nashua: Cross over the Everett Turnpike/Route 3 and follow Rt. 111/Kinsley Street for approximately 1 mile. Turn left at the second light, Pine Street. Proceed through one light and a stop sign. As you cross through the stop sign, you will find yourself entering the old historic Nashua mill yard. Proceed straight ahead and take aim at the tall smokestack with the word “Millyard” on it. You can’t miss it. When you are at the base of the stack, look up and straight ahead you will see the Millyard Technology Park building. See “Entrance to Building” below.

Entrance to Building
The entrance to the building is in the back - follow the road to the left of the building. Behind the building, continue beyond the first small parking lot, and park anywhere in the larger lot in front of the central visitor and employee entrance. UniFund is on the second floor, west, first office on right.

UniFund, LLC
Millyard Technology Park
13 Technology Way (Pine Street Extension)
Nashua, NH 03060
Tel: 603-595-5500
Fax: 603-595-9960
info@unifundonline.com
www.unifundonline.com